8"Dual Brake Booster With Master Cylinder & PV2 Proportioning Valve Kit For GM Corvette Ford SY-BB&MCS-0002

Brake Booster &Master Cylinder& Proportioning Valve Set

SY-BB&MCS-0002

SY-BB&MCS-0002

Zinc Brake Booster

Cast Iron Master Cylinder

Copper Proportioning Valve

 8"Zinc Dual Brake Booster

1:Application:

--Universal style

2:Description:

--The booster will bolt up to most street rods,hot rods,and many other vehicles.

--It also offers approximately 20% (some say up to 27%) more stopping power than 8" single diaphragm boosters.

--The booster mounts with a 4-bolt pattern.The 4 bolts are in a perfect square and are 3 3/8"apart (center to center).

--Installation to firewall and mount to the original master cylinder.Will use the factory pedal.No modifications necessary.

Cast Iron Master Cylinder

1:Application:

--Fit most GM application.This is Corvette style.

2:Description:

--GM Street/Hot Rod Cast Iron Master Cylinder.

--Cast iron coated body,dual ball zinc cap

--With a 1"bore

--9/16" & 1/2" Ports on Both Sides with Plugs for unused ports.

--The cap is attached by 2 small screws

--4 port unit,so you can mount your lines on either side

--With 3/8"fitting

--Works for Disc/Drum, Disc/Disc, or Drum/Drum Applications.

--Raw Finish.

--Includes plunger for Deep or Shallow Bore.

--For use with Manual or Power brakes.

--will work with any drum/drum,disc/drum or disc/disc setup

--Plugs are included to block the ports.

Proportioning Valve

1:Application:

--This is a universal valve and it will work on any vehicle as long as you can hook it up.

2:Description:

--Brass Disc/Drum Prop Valve, Same as the Original GM # 25509419, PV2 or AC Delco 172-1353.

--3/8-24" ports for front left and right caliper and 9/16-18" port for the rear brakes 1/2-20" & 7/16-18" ports in from the master cylinder.

Package: Including All Items In The Picture.

Professional Installation Is Highly Recommended (No Instruction Included).