7"Single Diaphragm Brake Booster With Master Cylinder&PV2 Proportioning Valve Kit For GM Corvette SY-BB&MCS-0001

Brake Booster &Master Cylinder& Proportioning Valve Set

SY-BB&MCS-0001

SY-BB&MCS-0001

Zinc Brake Booster

Cast Iron Master Cylinder

Copper Proportioning Valve

Universal 7"Single Diaphragm Zinc Brake Booster

1:Application:

--Universal style

2:Description:

--The booster will bolt up to most street rods,hot rods,and many other vehicles.

--It also offers approximately 20%(some say up to 27%)more stopping power.

--Standard 2 bolt brake master cylinder on top.

--Has 4 bolts on bottom that mount to the firewall with 33/8"spacing.

--Requires 18" of vacuum to operate properly, with this vacuum level, the booster will produce a maximum pressure output of 950 psi with a 1" bore master cylinder.

--This pressure level works well for four-wheel drum systems and disc/drum vehicles which are relatively light.

GM Corvette Style Cast Iron Master Cylinder

1:Application:

--Fit most GM application.This is Corvette style.

2:Description:

--Cast iron coated body,dual ball zinc cap

--With a 1"bore

--The cap is attached by 2 small screws

--4 port unit,so you can mount your lines on either side

--With 3/8"fitting

--will work with any drum/drum,disc/drum or disc/disc setup

--Plugs are included to block the ports

--9/16" & 1/2" Ports on one side.

--Raw Finish.

--Plunger for shallow or deep bore for Power or Manual Brakes

Proportioning Valve

1:Application:

--This is a universal valve and it will work on any vehicle as long as you can hook it up.

2:Description:

--Brass Disc/Drum Prop Valve, Same as the Original GM # 25509419, PV2 or AC Delco 172-1353.

--3/8-24" ports for front left and right caliper and 9/16-18" port for the rear brakes 1/2-20" & 7/16-18" ports in from the master cylinder.

Package: Including All Items In The Picture.

Professional Installation Is Highly Recommended (No Instruction Included).