The clutch release bearing operates synchronously with the clutch pressure plate, the release lever and the engine crankshaft, while the release fork can only move axially along the output shaft of the clutch. It is obviously impossible to use the release fork to dial the release lever directly, and the release lever can be moved to one side through the release bearing. The rotating side moves axially along the output shaft of the clutch, so as to ensure that the clutch can engage smoothly, disengage softly, reduce wear, and extend the service life of the clutch and the entire drive train.
Use note:
1. In accordance with the operating regulations, avoid the clutch in a semi-engaged and semi-disengaged state and reduce the number of times the clutch is used.
2. Pay attention to maintenance. Use the steaming method to soak the butter during regular or annual inspection and maintenance, so that it has sufficient lubricant.
3. Pay attention to leveling the clutch release lever to ensure that the elastic force of the return spring meets the requirements.
4. Adjust the free stroke to meet the requirements (30-40mm) to prevent the free stroke from being too large or too small.
5. Minimize the number of joining and separation, and reduce the impact load.
6. Step on lightly and easily, so that it can be joined and separated smoothly.