The clutch master cylinder is installed at the upper left of the cab. When we start, we must step on the clutch master cylinder. Under the action of the clutch master cylinder, the clutch cylinder is pushed, the cylinder cylinder pushes the jack, the jack pushes the clutch fork, the clutch fork pushes the release bearing to the lever on the clutch pressure plate, the lever presses down, and the clutch The slices cut off the power output by the engine to start in gear.
The role of the master cylinder
Automobile brakes are composed of: brake master cylinder, vacuum booster, brake cylinder, brake pads, brake discs, etc.
The brake master cylinder is installed above the cab and is adjacent to the accelerator pedal on the upper right side of the steering wheel. The brake master cylinder is divided into a front brake outlet cavity and a rear brake outlet cavity.
When the brake pedal is depressed, the brake oil of the master cylinder is pushed to the cylinder through the rear brake chamber and the front brake chamber through the role of the vacuum booster. Under the action of the oil pressure, the brake cylinder piston pushes the brake outward The top lever holds the brake pads tightly to the brake disc to play the role of brake deceleration and stop.
The clutch master cylinder and brake master cylinder of a small car can share an oil storage tank. There are two pipes connected to the clutch master cylinder and the brake master cylinder on the oil pot. The same type of brake fluid can be used between them. Vehicle brakes above light trucks are air brakes, which use air pressure instead of oil.
The clutch master cylinder cannot be used as a brake master cylinder. The working nature between the two is completely different. Only brake fluid can be used at the same time.


