Knowledge

Drum brakes wheel cylinder used on automobiles above has a history of nearly a century, but because of its reliability and powerful brake force, make

​When the driver depresses the clutch pedal, the push rod pushes the master cylinder piston to increase the oil pressure, enter the cylinder through t

​When the brake pedal is depressed, the push rod pushes the master cylinder piston forward.

The clutch is a part of the automobile transmission system directly connected to the engine. It is responsible for the cutting off and combination of

The clutch is an important part of the car, which is related to the driving safety of the car. With the development of the automotive industry, almost

When the clutch pedal is not stepped on, there is a gap between the master cylinder push rod and the master cylinder piston.

1. The clutch must be cleaned before installation to remove anti-rust grease and debris.

To check the wear of the cylinder hole of the master cylinder, the piston can be placed in the cylinder of the master cylinder, and the gap between th

Find the push rod of the pump. There are two screws on the push rod. Adjust the stroke of the push rod by tightening and loosening the screws, which i

Why you can unscrew the bleed bolt on the cylinder after several steps of braking to remove the air from the brake system;

At present, the clutch master cylinder is also called the clutch master pump. Its main function is to build up the pressure of the liquid in the clutc

Composition: Air-pressure brake master cylinder is mainly composed of upper cavity piston, lower cavity piston, push rod,